website Jump to the content
English
  • Español
  • English
EUR €
  • BGN лв.
  • CZK Kč
  • DKK kr.
  • EUR €
  • HUF Ft
  • PLN zł
  • RON Lei
  • SEK kr
butik@gregmoto.se
Highsider Can-Bus CBW1 Resistor 207-033Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033
Highsider Can-Bus CBW1 Resistor 207-033

Highsider Can-Bus CBW1 Resistor 207-033

Regular price €33,95


/
undefined
Many in stock - Ready to ship

SKU: 1107933

Related categories: Osorterat Kategori

Highsider Can-Bus CBW1 Resistor 207-033

€33,95

Highsider Can-Bus CBW1 Resistor 207-033

  • Shop safely
    Shop safely and securely with us
  • Fast deliveries
    The delivery time is usually 3-5 business days unless otherwise stated for the product
  • Secure payments
    We offer payments via card, invoice, and Swish.
  • Free shipping
    Free shipping over 1000 SEK

DESCRIPTION

Highsider Can-Bus Resistor CBW1 With Dip-switch.

Our Newly Developed Highsider Can-Bus Resistor CBW1 Fits Most Vehicles That Have a Can-Bus System.

The CBW1 Resistor Provides A Required Electrical Load for Your Vehicle, Which, if the dip switches are set correctly, will result in no flashing of the accessory flashlers in the cockpit.

In addition, a reliability is given. This Means:
If the Accessory Indicators Fail Due to an Electronic Fault, an Error Message is immedialy displayed in the cockpit.

Up to 2 Channels Can Be Operated, Such as Turn Signals at the Rear Left and Turn Signals at the Rear Right.

IF 2 Pairs of Indicators Need to Be Changed, Also 2 CBW1 Needed to Be Used.

Which Requirements Should Be Met In order to use the cbw1 on the motorbike:

The Motorbike was original produced with LED Indicators or the Motorbike has a can-bus system

If these requires are not met, the cbw1 unit will not function (!) In this case, we recommend the following resistances:

For Indicators With 21 Watt:
6.8 Ohm Partnumber 1108546002 or 10 ohm partnumber 1108546004

For Indicators with 10 watts:
27 Ohm Partnumber 1107562

The Following Resistance Values ​​Can Be Set On The CBW1:

  • 150 ohms
  • 170 ohms
  • 240 ohms
  • 300 ohms
  • 400 ohms
  • 600 ohms
  • 1200 ohms

Dimensions:
Height = 11mm
Width = 31mm (Without Straps)
Width = 46mm (with tabs)
Length = 40mm

Cable Length = 200mm With Pins

Connections:
Yellow = Input Channel 1 (+)
Orange = Output Channel 1 (+)
Blue = Input Channel 2 (+)
Red = Output Channel 2 (+)
Gray = Input Mass (-)
Black = Output Ground (-)

Hints:
- Up to 2 Channels Can Be Operated.
- The Connection is Explained precious in the mounting instructions!

40 52 80 50 10 By Unit
Are you in the right place? Please select your shipping destination and preferred language to see the correct product selection and delivery options.
Spain Flag Spain
English